日期：2023年9月18日

招標編號***e="16px;line-height:150%;font-family:"Arial",sans-serif">0747-2340SCCZX475

1.***（招標代理機構）***（招標人）委托，以國際招標方式邀請潛在投標人就下列貨物和有關服務提交密封投標：

1、設計范圍

1.1 耐火襯里的設計；

1.2 外保溫及防護層的設計；

1.3 設計文件需要提交給設計單位***。

2、供貨范圍

2.1 耐火襯里（包括但不限于耐火磚、保溫磚、陶瓷套管、澆注料、耐火泥漿、陶瓷纖維紙、陶瓷纖維毯）；

2.2 外保溫隔熱層；

2.3 錨固釘及內部支撐件（提交給再生爐制造廠家）；

2.4 所有襯里材料按照滿足整爐需要提供，業主不留剩余耐火磚。

3、現場施工范圍

3.1 材料的包裝、運輸、檢試驗、砌筑、驗收、試車以及技術服務；

3.2 內部原則上不要求除銹，如需要，可進行局部處理（工作量較小）；

3.3 內部腳手架搭拆（執行SH/T3555-2014規定，并符合《***腳手架作業管理辦法》中的要求）；

3.4 耐火襯里施工；

3.5 耐火材料報驗送檢；

3.6 負責將材料運至施工現場指定的位置；

3.7 負責半成品及成品質量的保護工作；

3.8 負責為了完成襯里施工所必須的臨時設施、防護棚，按照業主管理規定的安全、質量投入；

3.9 負責現場施工所需的臨時水電接入工作，并按照業主管理規定進行計量和交費（業主負責提供臨時水電的接入點，位置***區紅線100米以內；水電的費用由施工的單位***）。

4、業主工作范圍

4.1 外保溫防護層及捆扎鋼帶、鋼帶扣的供貨

4.2 外保溫隔熱層及防護層的施工

4.3 烘爐（廠家提供烘爐方案并進行技術指導）

5、合同執行職責

5.1現場施工由項目部負責管理

5.2設計由設計管理部管理

5.3物資制造及供貨由物裝中心管理

以上相關工作范圍與詢價***之處以本招標方案的要求為準。

詳見招標文件***《貨物需求一覽表及技術規格》。

2.***得到進一步的信息和查閱招標文件。

*3. 對投標人的資質業績要求：

1)投標人具有有效的營業執照（國內投標人）/企業經營許可證明文件（國外投標人）。

2)投標人應當提供在開標日前3個月內由其開立基本賬戶的銀行開具的銀行資信證明的原件或復印件。

3)投標人在投標前需在中國國際招標網（以下簡稱“招標網”，網址：http***dding.com）成功注冊。

4)信譽要求：

① 2020年1月1日至今，境內投標人在國家企業信用信息公示系統中未被列入嚴重違法失信企業名單或列入經營異常名錄信息，在“信用中國”網站（www***）或各級信用信息共享平臺中未列入失信被執行人名單。

證明材料：投標人需提供“信用中國”（www***）和“國家企業信用信息公示平臺”（http***.cn），截圖加蓋投標人公章并附在投標文件中。

② 2020年1月1日至今，境外投標人在中國境內近三年沒有不良業績記錄或嚴重質量問題，否則其投標也將被否決。

證明材料：投標人須提供承諾函加蓋投標人公章。

③投標人未被列入中國中化供應商黑名單庫（名單以投標截止時間***）；

5)本項目只接受制造商/生廠商投標；

證明材料（裝訂在投標文件中）：投標人需提供制造商資格聲明加蓋投標人公章并裝訂在投標文件中。

6)財務和經營狀況要求：投標人沒有處于破產、資產凍結、財產被接管、被責令停業、投標資格被取消等狀態，且在 2018 年以來財務狀況良好，具有足夠資產及能力來有效地履行合同；

證明材料：投標人須提供承諾函加蓋投標人公章并裝訂在投標文件中。

7)業績要求：

2018年1月1日至今（以合同簽訂時間為準），投標人在中國境內具有新建丙烯腈聯合裝置SAR廢酸再生爐耐火材料成套供貨業績。

證明材料：投標人須提供相應業績的合同、技術協議等，其內容至少應包括項目名稱、用戶名稱、裝置規模、供貨的耐火材料品種及規格和參數等、供貨數量、合同簽訂日期以及簽署和蓋章頁、用戶聯系人和電話等。

8)本項目不接受聯合體投標。

招標人***保留審查原件的權利，如發現以上資質證書、業績及相關資料造假的，作否決投標處理。

4.有興趣的潛在投標人可于2023年9月18日至2023年9月25日每天（節假日除外）8:30至17:00時（北京時間）在下列地點***，平臺使用及技術支持費為2000300地點：中化商務電子招投標平臺

聯系人：中化商務電子招投標平臺

電話：86+10-***

網上報名及下載招標文件：登錄中化商務電子招投標平臺（e.sinochemitc.com），潛在投標人需先進行網上注冊（免費），通過網上支付平臺使用及技術支持費，支付成功后，可下載招標文件***。

在獲取招標文件后，投標人需登陸中化能源采購供應鏈SCM平臺（http***m.com）進行注冊（免費），并上傳標書獲取憑證（發票），審核完畢后，需在SCM平臺點擊標書下載才能進行后續流轉，SCM平臺技術支持電話：400-818-8227 轉 2。

特別注意：

①投標文件（紙質文件+電子文件）須按招標文件***，否則不予接收。

②投標人需在SCM系統中錄入本項目的報價***截止時間***應鏈SCM平臺（http***m.com）,全流程完成的標志為供應商獲得“投標回執”。

③當電子版文件與紙質文件不一致時，以紙質文件為準。

業務聯系

地址：***市***區***路24號院平安幸福中心B座25層，郵編：100073

聯系人：***、邱少尉、常剛、陳志超

電話：+86 ***524，+86 ***906

電子郵件：chenxiaomei02@sinochem.com , qiushaowei@sinochem.com

5.所有投標文件應于2023年10月9日9:30時（北京時間）之前遞交到以下地點，開標儀式定于2023年10月9日9:30時舉行。屆時請無法現場參與開標儀式的投標人代表出席線上開標儀式。線上開標儀式將以騰訊會議形式進行，請?zhí)崆跋螺d騰訊會議軟件（免費）。會議ID和會議密碼將在開標前3日以郵件形式告知投標人。

投標文件遞交地點***：***市***區***路24號院平安幸福中心B座23層會議室（線上同步）。

投標文件遞交方式：投標人采用送達或郵寄，兩種方式均應保證在投標文件遞交截止時間******。郵寄地址：***市***區***路24號院平安幸福中心B座25層陳曉梅收 ***524。

6.外幣支付平臺使用及技術服務費的賬號：

戶名：***

開戶行：***北京豐臺支行

***5282

***7855

SWIFT Code：BKCH CN BJ 110

請投標人在電匯平臺使用及技術支持費時，在匯款附言里依次注明：①招標編號***style="16px;font-family:"Arial",sans-serif">“X475”；②平臺使用及技術支持費；③投標人名稱。

Date: Sep.,18th, 2023

Bid No.:0747-2340SCCZX475

1.Entrusted by Sinochem Energy High-Tech Co., LTD Shanghai Branch (Tenderee), Sinochem Commerce Co., Ltd. (Tendering Agent) invites sealed bids from eligible potential bidders in terms of following goods and associated service in the manner of international competitive bidding.

1. Design scope

1.1 Design of refractory lining;

1.2 Design of external thermal insulation and protective layer;

1.3 The design documents shall be submitted to the design unit and the process package licensor for confirmation.

2. Scope of supply

2.1 Refractory lining (including but not limited to refractory brick, insulating brick, ceramic sleeve, castable, refractory mortar, ceramic fiber paper and ceramic fiber blanket);

2.2 External thermal insulation layer;

2.3 Anchor nails and internal supports (to be submitted to the regenerator manufacturer);

2.4 All lining materials shall be provided to meet the needs of the whole furnace, and the Owner shall not leave any remaining refractory bricks.

3. Site construction scope

3.1 Packaging, transportation, inspection and test, masonry, acceptance, commissioning and technical services of materials;

3.2 Internal derusting is not required in principle. If necessary, local treatment can be carried out (the workload is small);

3.3 Erection and removal of internal scaffolds (in accordance with SH/T3555-2014 and the Scaffold Operation Management Measures of Sinochem Quanzhou Petrochemical Co., Ltd.);

3.4 Refractory lining construction;

3.5 Application for inspection of refractory materials;

3.6 Be responsible for transporting the materials to the designated location on the construction site;

3.7 Be responsible for the quality protection of semi-finished products and finished products;

3.8 Be responsible for the safety and quality input of temporary facilities and protective sheds necessary for the completion of lining construction in accordance with the management regulations of the Owner;

3.9 Be responsible for the connection of temporary water and electricity required for site construction, and measure and pay according to the management regulations of the Owner (the Owner is responsible for providing the connection point of temporary water and electricity, which is located within 100 meters of the red line of the battery limit; the cost of water and electricity shall be borne by the construction unit).

4. Scope of work of the Owner

4.1 Supply of external thermal insulation protective layer, binding steel belt and steel belt buckle

4.2 Construction of external thermal insulation layer and protective layer

4.3 Oven drying (the manufacturer shall provide the oven drying scheme and technical guidance)

5. Contract execution responsibilities

5.1 Site construction shall be managed by the Project Department.

5.2 Design shall be managed by the Design Management Department.

5.3 Material manufacturing and supply shall be managed by the Material Loading Center.

In case of any inconsistency between the above scope of work and the inquiry documents, the requirements of this bidding scheme shall prevail.

(Details shall be found in Section 8 Schedule of Requirements and Technical Specifications.)

2.Interested Potential bidders may obtain further information and refer to Bidding

Documents from Sinochem Commerce Co., Ltd.

*3. Qualification and Performance requirements to the bidders:

1) The bidder must have a valid business license or business license certificate.

2) The bidder shall provide the original or photocopy of the bank credit certificate issued by the bank where the account is opened within 3 months before the bid opening date.

3) The bidders shall successfully register on China International Tendering Website (hereinafter referred to as "bidding.com", website: http***dding.com) before bidding.

4）Credibility requirements:

① From January 1, 2020 to the present, the domestic bidders have not been listed in the national enterprise credit information public display system or in the business exception list, and have not been listed in the "Credit China" website (www***) or credit information sharing platform at all levels. The list of executed persons in breach of trust.

Supporting materials: Bidders should provide "Credit China" (www***) and "National Enterprise Credit Information Public Platform" (http***.cn). The screenshot should be stamped with the official seal of the bidder and attached to the bid document.

② From January 1, 2020 to present, overseas bidders have no bad performance records or serious quality problems in China, otherwise their bids will also be rejected.

Supporting materials: Bidders must provide a letter of commitment.

③ Bidders are not listed in the blacklist database of suppliers of Sinochem. (the list is subject to the deadline of bidding);

5) The bidder must be the manufacturer.

Supporting materials (bound in the bidding document): the bidder must provide the manufacturer"s qualification statement stamped with the bidder"s official seal.

6) Requirements for financial and operating conditions: the bidder is not in the state of bankruptcy, asset freezing, property being taken over, being ordered to suspend business, or being disqualified for bidding, and has been in good financial condition since 2018, and has sufficient assets and capacity to effectively perform the contract;

Supporting materials: the bidder shall provide a letter of commitment, which shall be stamped with the official seal of the bidder and bound in the bidding documents.

7) Performance requirements：

From January 1, 2018 to the present (subject to contract signing time), The Bidder has complete supply performance of refractory materials for SAR waste acid regeneration furnace of the new acrylonitrile complex in China.

Supporting materials: the bidder shall provide the contract and technical agreement with corresponding performance, which shall at least include the project name, user name, plant scale, supplied refractory material variety, specification and parameters, supply quantity, contract signing date and signing and stamping page, user contact person and telephone number, etc.

8)The Joint Venture bidding shall not be accepted in this bidding project.

The bidder and the bid evaluation committee reserve the right to review the originals of qualification certificates, performance and relevant information. If they are found to be falsified, the bid will be rejected.

4. Interested bidders can register and download the bidding documents (electronic version) online from 8:30 AM to 17:00 PM (Beijing time) every day from Sep., 18th, 2023 to Sep., 25th, 2023 (except holidays). The fee for platform use and technical support is RMB 2000 or USD 300. Bidders that did not register and download the bidding documents from Sinochem Commerce Co., Ltd. shall be rejected.

Address for bidding documents: Sinochem Commerce Electronic Bidding Platform Website

Contact person for bidding documents: Sinochem Commerce Electronic Bidding Platform

Website

Tel: 86+10-***

Online registration and downloading bidding documents: Login to Sinochem Commerce Electronic Bidding Platform Website (e.sinochemitc.com), potential bidders need to register online first (free of charge), pay the fee for platform use and technical support through online, after successful payment, you can download the bidding documents (electronic version) and VAT electronic ordinary invoice.

After obtaining the bidding documents, the bidder shall log in the SCM platform of Sinochem Energy Procurement supply Chain (http***m.com) for registration (free of charge), upload the bidding documents to obtain vouchers (invoices), and click the bidding documents to download on the SCM platform after the review. The technical support phone of SCM platform***turn to 2.

Special Note:

① The bid documents (paper documents and electronic documents) shall be sealed and delivered to the bid opening address before the bid deadline in accordance with the requirements of the bidding documents, otherwise they will not be accepted.

② Bidders are required to enter the quotation for this project in the SCM system and upload the electronic bid documents to the SCM platform of Sinochem Energy Procurement Supply Chain (http***m.com) before the bid deadline.

③ When the electronic document is inconsistent with the paper document, the paper document shall prevail.

For Project Inquiry:

Contact address for the Project: 25th Floor, Building B, Ping’an Fortune Center, No. 24 Lize Road, Fengtai District, Beijing.China. 100073,P. R. China.

Contact person: Ms. Chen Xiaomei, Mr. Qiu Shaowei, Mr. Chang Gang, Mr. Chen Zhichao

Tel: +86 ***524, +86 ***906

E -Mail:qiushaowei@sinochem.com, chenxiaomei02@sinochem.com

5. All Bids must be delivered to the following address before 9:30 a.m., Oct.,9th, 2023(Beijing time). Time for bid opening ceremony is 9:30 a.m., Oct., 9th, 2023 (Beijing time).Due to the need of epidemic prevention and control, representatives of bidders who cannot participate in the bid opening ceremony on site will be invited to attend the online bid opening ceremony at that time. The online bid opening ceremony will be conducted in the form of Tencent conference, please download Tencent conference software (free of charge) in advance. The conference ID and conference password will be informed to the bidders by email 3 days before the bid opening.

Address for bid submission and bid opening: Meeting Room, 23rd Floor, Building B, Ping’an Fortune Center, No. 24 Lize Road, Fengtai District, Beijing.China.

Submission method of bid documents: Bidders shall deliver or mail the bid documents, and both methods shall guarantee the bid documents to reach the submission location specified in the bidding documents before the deadline for submission of bid documents. Mailing address: Meeting Room, 23rd Floor, Building B, Ping’an Fortune Center, No. 24 Lize Road, Fengtai District, Beijing China. Ms. Chen Xiaomei, +86 ***524.

6. Foreign currency account number for paying the fee for platform use and technical support.

Account name: Sinochem Commerce Co., Ltd

Bank of China: Bank of China Limited Beijing Fengtai Sub-branch

U.S. dollar account number: ***5282

Euro account number: ***7855

SWIFT Code：BKCH CN BJ 110

Bidders are requested to indicate in the remittance envelope, in order, when remitting the fee for platform use and technical support: ① the last four digits of the tender number, i.e.: "X475"; ② the fee for platform use and technical support; ③ the name of the bidder.